Ikelite TTL Converter for Nikon DSLR with Ikelite Connector
(Version 2)
Nikon TTL conversion circuitry has been known to be the most accurate and fastest TTL exposure available for an underwater strobe. Let the camera adjust your Ikelite strobes while you focus on photo.
The TTL Converter is equipped with a simple rotating switch that allows toggling between TTL and manual exposure. When in TTL mode, exposure compensation may be accessed via the camera's built-in menus. Proper operation and TTL exposure requires use of a current-model Ikelite DS strobe, see compatibility by serial number below.
Use of this TTL ConverterTTL Converters are not usable with non-Ikelite strobes or non-DS Ikelite strobes. This requires a Ikelite ICS-5 electrical bulkhead strobe connector and TTL hotshoe.
The updated adapter provides accurate TTL exposure with the following models.
Camera Compatibility:
- Nikon D7000, D7100, D7200, D7500
- Nikon D5000, D5100, D5200, D5300, D5500, D5600
- Nikon D800, D810, D850
- Nikon D600, D610, D700, D750
- Nikon D500
- Nikon D200, D300, D300s
- Nikon D40, D50, D60, D70, D70s, D80, D90
- Nikon D2X, D3, D4
* Not compatible with any other models except as listed above
Strobe Compatibility
- DS50 strobes: above serial number 75510 with update
- DS51 strobes: above serial number 78700
- DS125 strobes: above serial number 7928
- DS160, DS161 strobes: all
- DS200 strobes: above serial number 7163
