Anglerfish Leak Detection System
Anglerfish Leak Detect System consist of:
- Vacuum valve
- Leak detect circuit
- Vacuum pump (manual and electrical)
- Smart phone App
1. M14 Vacuum Valve
The Anglerfish M14 Vacuum Valve is a must-have for underwater photographers and videographers. It allows you to draw air out of the housing to create a vacuum, which ensures that the housing is watertight. This gives you the peace of mind that you need to focus on taking great photos and videos.
The Anglerfish M14 Vacuum Valve is easy to use. Simply attach it to the housing and pump the handle until the vacuum indicator turns green. This indicates that the housing is watertight.
2. Anglerfish Leak Detection Circuit
The Anglerfish Leak Detection Circuit allows you to monitor the pressure inside your underwater housing. It is also used to detect leaks and floods of water. Another feature of the leak detection circuit is that it can connect to your mobile phone to check the status - pressure, temperature and can set alam threshold if pressure is lost. In addition
LED Indicator:
- Fast Flashing Green - When the unit is turned on and when air enters the housing and becomes equivalent to the external air pressure.
- Flashing Orange - While drawing out air from the housing
- Solid Green Light - Pressure achieved
- Slow Flashing Green - After the air has been drawn out and negative air pressure inside the housing is maintained.
- Flashing Red Light - Pressure Lost
Circuit Mount Options:
1. Standard Mount (STD) - Works in Anglerfish Housings
2. Flat Double-Sided Tape (FLT) - Works in all other housings and is affixed with double sided tape. NOTE: You should ensure there is room inside the housing and there is a flat surface to attach the circuit board with double sided tape.
3. Vacuum pump (manual and electrical)
There are two options when it comes to Vacuum Pumps:
1. The Anglerfish High Flow Motorized Vacuum Pump is the quick and easy way to vacuum test your underwater housing. It is powered by (4) AA batteries and can draw out air from your housing in just seconds. This ensures that your housing is watertight and prevents leaks that could ruin your dive.
2. The Anglerfish Vacuum Manual Hand Pump allows you to draw out air from your housing easily. This attaches to your Anglerfish M14 Vacuum Valve and is also compatible with other vacuum valves from other manufacturers.
4. The App
The app allows the user to read the pressure inside the housing up to 1mbar pressure resolution. this allows the user to detect the smallest leak inside the housing. The app allows custom configuration of the various parameters used by the circuit.
