Divevolk Internal Red Filter for Wide Angle Lens
Color fades fast underwater — reds disappear first, leaving everything in cold blue-green tones. The DIVEVOLK Internal Red Filter solves this without the compromises of traditional threaded filters.
Unlike conventional 67mm screw-on red filters that stack on top of a wide-angle lens and push it further from the phone camera — causing black corner vignetting on ultra-wide sensors — this filter inserts directly into the lens barrel. Its precision-molded plastic clips snap into the inner wall of the wide-angle lens metal ring, sitting flush against the glass. The wide-angle lens then screws directly onto the SeaTouch 6 Pro housing's 67mm adapter ring as normal, keeping the lens-to-phone distance unchanged.
The result: full wide-angle field of view with no black corners, and natural color restored in a single setup. Optimal color correction from 5 to 25 meters — the depth range where most recreational diving and snorkeling happens.
Important: This filter is designed exclusively for use with the DIVEVOLK Wide-Angle Lens. It cannot be used standalone on the housing port.
Please use only the phone adapters included with your SeaTouch 6 Pro — do not use phone adapters from other SeaTouch model. An incompatible phone adapters may cause your phone to fit improperly and lead to damage.
Key Features of the Internal Red Filter
Optimal at Recreational Depths
Engineered for 5–25 meters — the sweet spot for most diving and snorkeling conditions where red light absorption is most noticeable.
In-Filter, Not On-Filter
Snap-fit clips install inside the wide-angle lens barrel — no added thickness, no stacking, no vignetting. The lens screws onto the housing as if the filter isn't even there.
No Black Corners
By eliminating the distance gap between lens and phone camera, ultra-wide sensors capture the full frame edge to edge — even on phones with aggressive ultra-wide cameras.
Wide-Angle + Color, Together
Enjoy expanded field of view and natural red-tone restoration in one rig. No need to choose between coverage and color accuracy.
Quick Install, No Tools
Two-finger press to snap the filter into the lens ring. No threading, no alignment guesswork. Ready in seconds before your dive.
- Filter Type: Internal snap-in red filter
- Design: Ultra-thin, zero added thickness — eliminates vignetting
- Frame: Black frame with alignment tabs for snap-in mounting
- Compatibility: SeaTouch 6 PRO SeaTouch 4 Max Plus SeaTouch 4 Max Platinum (Expansion Clamp and Wide Angel Lens required)
- Advantage vs 67mm: No stacking thickness — no vignetting on slim phones
- Function: Restores natural color in shallow to mid-depth water (5-20m) Compensates for red light absorption
- Underwater Installation: Snap-in, no tools required